The Starvmount Starlink Router MINI Mount V2 is a purpose-designed plastic mounting shell for the Starlink MINI Router Version 2.
It provides a clean, secure and practical way to fix the Starlink MINI Router Version 2 to a wall, panel, cabinet or other flat mounting surface. This makes it well suited to vehicle, marine, motorhome, campervan, RV, off-grid and fixed installation environments where loose equipment can move, vibrate or place strain on connected cables.
STARLINK ROUTER MINI MOUNT V2
The mount is designed to hold the router securely while also improving cable routing. By changing the orientation of the network cable connection so it aligns with the mounting surface, the installation can reduce cable bend, cable strain and pressure on the router ports. This is particularly useful where the router is installed in a compact area or where cables need to be routed neatly behind, below or along a surface.
The Starlink MINI Router Version 2 supports a wider 9-36 V input range, allowing it to be powered directly from a suitable DC power system without requiring the Starvmount MINI Router PSU. The Starlink Router MINI Mount V2 is supplied with a power cable for connection to a 12/24v power source. The mount provides a tidy and compact installation format for the router and connected cables, helping to reduce loose components and simplify cable management.
The Starlink MINI Router version can be identified by the Ethernet port labelling. Version 1 routers use dish and network icons on the Ethernet ports. Version 2 routers have the Ethernet ports labelled 1 and 2. This mount is designed for the Version 2 router.
Key features
Designed for the Starlink MINI Router Version 2
Secure plastic mounting shell for wall, panel or flat surface installation
Helps protect the router from movement in mobile and off-grid environments
Improves cable routing by aligning the network cable connection with the mounting surface
Reduces cable bend and strain on the router Ethernet ports
Supports a cleaner and more compact DC-powered router installation
Suitable for van, motorhome, RV, marine, vehicle, workshop and fixed installations
Please note: The Starvmount MINI Router PSU is not included with this mount and is not required for the Starlink MINI Router Version 2. The Version 2 MINI Router supports a 9-36 V input range and can be connected to a suitable DC power source without using the separate Starvmount MINI Router PSU.
More Information
More Information
Compatibility
Starlink™ Mini X, Starlink™ Standard 4, Starlink™ MINI Router Version 2
Brand Name
Starvmount
Warning Summary
Ensure the mount is fixed to a suitable surface capable of supporting the router, PSU and connected cables. Use fixings appropriate for the mounting surface and installation environment. Do not overtighten fixings, as this may damage the plastic shell. Cables should be routed without sharp bends, pinching or excessive tension, and the router or PSU should not be forced into the mount if cables or connectors are misaligned. Install in a location with suitable ventilation and avoid enclosing the router or PSU in a way that may trap heat. Check all connections after installation and before powering the system.
Copyright Starvmount™ all rights reserved. Starvmount™ is not affiliated with Starlink™ a division of SpaceX™. Starvmount™ provides products and solutions for the use of Starlink™ in a mobile, camping and RV setting. Starvmount™ is registered trademark of Greysky Industries Ltd.
