Starvmount

The DC Relay with Wiring Harness is designed to provide reliable switched DC power for Starlink installations while keeping the high-current 12V or 24V cable run short.

A high-quality DC-to-DC power supply designed for 12V and 24V DC systems supporting input voltage range of 9-36v, stepping up to 48V with a maximum power output of 240W.

The Starvmount Starlink MINI Router PSU is a DC power solution designed to run the Starlink MINI Router directly from 12V or 24V DC electrical systems.

The MINI POE Receiver features two fixed cables: one Ethernet cable and one DC barrel connector. Both cables include Starlink weather seals and are designed to connect directly to the two ports on the Starlink MINI, providing power via the DC barrel connector and network connectivity via Ethernet. These two connections are combined within the […]

Discover what is Starlink network coverage, its significance, workings, and how it benefits off-grid connectivity for digital nomads and vanlifers.

Follow this Starlink RV installation guide for a step-by-step process to set up reliable internet connectivity on your off-grid adventures.

With more than 10,000 Starlink satellites now in low Earth orbit, it’s easy to assume mounting orientation no longer matters. And to an extent, that’s true — especially now the network isn’t so heavily concentrated over North America. But how and where you install your dish still influences performance, depending on how you use it. […]

A library of example installation schematics providing installation options. DishyNOAC – STARLINK™ STANDARD (GEN3 – REV4) Schematics based around the DishyNOAC DishyNOAC – STARLINK™ MINI POE Schematics based around the Starlink™ MINI POE DC Power Kit DishyNOAC – STARLINK™ STANDARD ACTUATED (GEN2 – REV3) Schematics based around the DishyNOAC DC2DC – STARLINK™ STANDARD (GEN3 – […]

PLEASE NOTE: This Install Guide is only relevant to “DC2DC-12/48-240W” A high-quality DC-to-DC power supply designed for 12V DC systems, stepping up to 48V with a maximum power output of 240W. Ideal for Various Starlink™ DC Power Setups: Power Requirements The DC2DC is designed for use with 12V systems. To power Starlink™, your power source […]

The Teltonika RUTX50 and now RUTC50 represent an excellent Mobile enable Wi-Fi router for use with Starlink in combination with the DishyNOAC. Follow the following video for initial device set up First Start RUTX50: https://wiki.teltonika-networks.com/view/QSG_RUTX50 First Start RUTC50: https://wiki.teltonika-networks.com/view/QSG_RUTC50 How To Setup Starlink and 5G Router for Failover Using Starlink alongside 4/5G as a failover […]